Single row deep groove ball bearings can accommodate radial and axial loads, and allows a high speed. Deep groove ball bearings are separable

Deep groove ball bearings are used:

Due to limited capacity of deep groove ball bearings are self-aligning, so you need good concentricity of the bearing SEAT, bad concentricity

Affect the operation of the balance, increased bearing stresses to shorten bearing service life. Deep groove ball bearings allow only very

Small deflection angle, this also depends on the load size.

Min. Sealed deep groove ball bearings manufacture are maintenance-free, and can make the structure simplified.

1. With seals or shields bearing (2RS or ZZ)

2. With shields: Single-sided or double-sided iron shields. (ZZ)

3. With non-contact rubber seal ring: Non-contact seals on one or both sides. (Expressed as 2LS)

4. Band-contact rubber seal ring: Single-sided or double-sided contact-contact seal rings and inner ring.

By the finite element analysis, the stress and strain datasets for outer race and inner race are obtained and used to calculate the fatigue lives. Based on a reliable fatigue criterion, the effect of various applied loads on the fatigue lives of outer race and inner race is investigated. Several parameters, namely the raceway groove Deep groove ball bearings wholesaler curvature radii of outer race and inner race and the thicknesses of outer race and inner race are varied to investigate their effect on the fatigue lives. Research results provide useful guidelines for determining the design parameters.