Full complement cylindrical roller bearings consist of Single row full complement cylindrical roller bearings and Double row full complement cylindrical roller bearings.

Cylindrical roller bearings have two integral flanges on the inner ring and one integral flange on the outer ring and can thus support axial loads acting in one direction and provide axial shaft location in one direction. A retaining ring at the flangeless side of the outer ring holds the bearing assembly together.

Cylindrical roller bearings have an inner ring with three integral flanges and a flangeless outer ring. A retaining ring, inserted in the outer ring between the roller rows, keeps all bearing cylindrical roller bearings wholesale together. Axial displacement of the shaft relative to the housing in both directions can be accommodated within the bearing.

Full complement cylindrical roller bearings incorporate a maximum number of rollers and are therefore suitable for very heavy radial loads. However, they cannot operate at the same high speeds as caged design cylindrical roller bearings.

A retaining ring is inserted in the outer ring at the side opposite the integral flange and serves to hold the bearing together. A retaining ring, inserted in the outer ring between the roller rows, keeps all cylindrical roller bearings manufacture components together. Axial displacement of the shaft relative to the housing in both directions can be accommodated within the bearing. The bearings are therefore suitable for non-locating bearing positions.